Introduzione

Instructions on how to replace the height adjustment wheels at the bottom of the vacuum.

Parti

Nessuna parte richiesta.

Place the vacuum on its back.
  • Place the vacuum on its back.

  • Push the red switch to the left.

  • The black cover will then pop out. Remove the cover.

Aggiungi Commento

Locate the red switch near the head of the vacuum.
  • Locate the red switch near the head of the vacuum.

  • Push the switch left.

  • This will pop out the plastic base plate. Remove the plate from the vacuum.

Aggiungi Commento

  • Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.

Aggiungi Commento

  • Remove screws from the left side of the white plastic frame.

Aggiungi Commento

  • Pull the white plastic frame away from the vacuum.

  • Slide the vacuum belt off the metal rod.

  • Pull the brush off the vacuum.

Aggiungi Commento

  • Remove the screws at the bottom of the white frame near the roller.

Aggiungi Commento

  • Pop off the right side of the white frame.

  • Pull down the blue hinge and roller.

  • Pull free the roller from the vacuum.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Nathan Yung

Membro da: 18/01/2018

241 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S12-G4, Banghart Winter 2018 Membro di Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 16

Tutti i Tempi: 51