Introduzione

Use this guide to replace the brush in the head of the vacuum.

Place the vacuum on its back.
  • Place the vacuum on its back.

  • On the bottom right side, push the red lever to the left.

  • Remove the plastic cover.

Aggiungi Commento

Grab the red switch under the brush and push left.
  • Grab the red switch under the brush and push left.

  • Then remove the plastic base plate.

Aggiungi Commento

  • Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.

Aggiungi Commento

  • Remove the two screws on the left side of the brush.

Aggiungi Commento

  • Pull the clear plastic away from the head of the vacuum.

  • Slide the belt off the metal rod with your finger.

  • Pull the brush free.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Erik Ingels

Membro da: 18/01/2018

193 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S12-G4, Banghart Winter 2018 Membro di Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 46