Salta al contenuto principale

Hoover Power Scrub FH50150 Brush Replacement

Cosa ti serve

  1. Hoover Power Scrub FH50150 Brush Replacement, Handle Replacement: passo 1, immagine 1 di 2 Hoover Power Scrub FH50150 Brush Replacement, Handle Replacement: passo 1, immagine 2 di 2
    • Push the button on the top of the clean water/solutions tank and pull on the handle below the button simultaneously. The tank should easily swing out.

  2. Hoover Power Scrub FH50150 Brush Replacement: passo 2, immagine 1 di 2 Hoover Power Scrub FH50150 Brush Replacement: passo 2, immagine 2 di 2
    • Using the screwdriver, unscrew both of the screws on the backside of the handle.

  3. Hoover Power Scrub FH50150 Brush Replacement: passo 3, immagine 1 di 1
    • Pull the handle upwards. It should freely slide away from the base of the machine.

  4. Hoover Power Scrub FH50150 Brush Replacement, Water Tank: passo 4, immagine 1 di 1
    • Unlatch the grey switch labeled “Tank Release”.

  5. Hoover Power Scrub FH50150 Brush Replacement: passo 5, immagine 1 di 1
    • Gently pull on the water tank until it releases from the base.

  6. Hoover Power Scrub FH50150 Brush Replacement, Brush: passo 6, immagine 1 di 2 Hoover Power Scrub FH50150 Brush Replacement, Brush: passo 6, immagine 2 di 2
    • With the vacuum laying on its back pull gently on the brush part and wiggle until it pulls out of place. Now the brushes are ready for cleaning.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Logan Brown

Membro da: 01/22/18

73 Reputazione

1 Guida realizzata

Team

Cal Poly, Team S16-G4, Banghart Winter 2018 Membro di Cal Poly, Team S16-G4, Banghart Winter 2018

CPSU-BANGHART-W18S16G4

5 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 25

Tutti i Tempi: 1,824