Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Hoover LiNX Power Button Replacement

Cosa ti serve

  1. Hoover LiNX Power Button Replacement, Hoover LiNX Handle Teardown: passo 1, immagine 1 di 1
    • Remove the single 15mm Phillips #1 screw from the handle.

  2. Hoover LiNX Power Button Replacement: passo 2, immagine 1 di 1
    • Remove the handle by pulling it up.

  3. Hoover LiNX Power Button Replacement: passo 3, immagine 1 di 1
    • Remove two 15mm Phillips #1 screws from the handle.

  4. Hoover LiNX Power Button Replacement: passo 4, immagine 1 di 2 Hoover LiNX Power Button Replacement: passo 4, immagine 2 di 2
    • Use a plastic opening tool to carefully pry the black cover off of the handle.

  5. Hoover LiNX Power Button Replacement: passo 5, immagine 1 di 2 Hoover LiNX Power Button Replacement: passo 5, immagine 2 di 2
    • Remove five 15mm Phillips #1 black screws from the handle.

  6. Hoover LiNX Power Button Replacement: passo 6, immagine 1 di 2 Hoover LiNX Power Button Replacement: passo 6, immagine 2 di 2
    • Remove the silver plastic cover using the plastic opening tool.

  7. Hoover LiNX Power Button Replacement, The Motherboard Inside The Handle: passo 7, immagine 1 di 1
    • Remove the black rubber cover from the motherboard.

  8. Hoover LiNX Power Button Replacement: passo 8, immagine 1 di 1
    • Remove two 8mm Phillips #1 screws from the motherboard.

  9. Hoover LiNX Power Button Replacement: passo 9, immagine 1 di 2 Hoover LiNX Power Button Replacement: passo 9, immagine 2 di 2
    • Carefully pull the motherboard out with its attached wires.

  10. Hoover LiNX Power Button Replacement, Power Button: passo 10, immagine 1 di 2 Hoover LiNX Power Button Replacement, Power Button: passo 10, immagine 2 di 2
    • Replace the power button.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Mark Nelson

Membro da: 01/25/18

452 Reputazione

2 Guide realizzate

Team

USF Tampa, Team S7-G4, Passmore Spring 2018 Membro di USF Tampa, Team S7-G4, Passmore Spring 2018

USFT-PASSMORE-S18S7G4

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 18

Tutti i Tempi: 1,207