Aggiusta la tua roba Comunità Store

Honeywell HY-204 Control Panel Replacement

Introduzione

This guide is necessary to complete before many of our other replacement guides, but it can also stand alone as a replacement guide for the control panel. This is a really simple guide and should only take you a few minutes!

Cosa ti serve

  1. Honeywell HY-204 Control Panel Replacement, Case: passo 1, immagine 1 di 2 Honeywell HY-204 Control Panel Replacement, Case: passo 1, immagine 2 di 2

    • Before you begin, be sure to unplug the fan.

    • Remove the four 14 mm screws from the back of the device using the Phillips #0 Screwdriver.

    Modifica

  2. Honeywell HY-204 Control Panel Replacement: passo 2, immagine 1 di 2 Honeywell HY-204 Control Panel Replacement: passo 2, immagine 2 di 2

    • Pull the front and back parts of the case away from each other until the back is free from the front. This may require a large amount of force.

    Modifica

  4. Honeywell HY-204 Control Panel Replacement, Control Panel: passo 3, immagine 1 di 2 Honeywell HY-204 Control Panel Replacement, Control Panel: passo 3, immagine 2 di 2

    • Remove the two 3mm screws found just below the top of the device using the Phillips #0 Screwdriver.

    Modifica

  5. Honeywell HY-204 Control Panel Replacement: passo 4, immagine 1 di 1

    • Pry off the control panel by forcefully lifting the tab located inside the front of the fan with the plastic opening tool.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 3 altri collaboratori

Nolan Ernotte

Membro da: 10/14/14

366 Reputazione

3 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

Cal Poly, Team 10-40, Amido Fall 2014 Membro di Cal Poly, Team 10-40, Amido Fall 2014

CPSU-AMIDO-F14S10G40

3 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 498