Salta al contenuto principale

Honda EU2200IT A2 Air Filters Replacement

Cosa ti serve

  1. Honda EU2200IT A2 Air Filters Replacement, Honda EU2200IT A2 Safety Precautions: passo 1, immagine 1 di 1
    • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

  2. Honda EU2200IT A2 Air Filters Replacement, Disconnect the spark plug: passo 2, immagine 1 di 2 Honda EU2200IT A2 Air Filters Replacement, Disconnect the spark plug: passo 2, immagine 2 di 2
    • Lift and remove the spark plug cover.

  3. Honda EU2200IT A2 Air Filters Replacement: passo 3, immagine 1 di 2 Honda EU2200IT A2 Air Filters Replacement: passo 3, immagine 2 di 2
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  4. Honda EU2200IT A2 Air Filters Replacement, Remove the maintenance cover: passo 4, immagine 1 di 1
    • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

  5. Honda EU2200IT A2 Air Filters Replacement: passo 5, immagine 1 di 3 Honda EU2200IT A2 Air Filters Replacement: passo 5, immagine 2 di 3 Honda EU2200IT A2 Air Filters Replacement: passo 5, immagine 3 di 3
    • Swing the top of the maintenance cover out.

    • Remove the maintenance cover.

  6. Honda EU2200IT A2 Air Filters Replacement, Remove the air filters: passo 6, immagine 1 di 1
    • Remove the Phillips screw securing the filter cover.

    • During reassembly, be sure to tighten the screw to at least 1.7 ft-lb to prevent it from loosening during operation.

  7. Honda EU2200IT A2 Air Filters Replacement: passo 7, immagine 1 di 2 Honda EU2200IT A2 Air Filters Replacement: passo 7, immagine 2 di 2
    • Remove the filter cover.

  8. Honda EU2200IT A2 Air Filters Replacement: passo 8, immagine 1 di 2 Honda EU2200IT A2 Air Filters Replacement: passo 8, immagine 2 di 2
    • Remove the air filters from the filter box.

    • To clean the filters:

    • Clean the filters in warm soapy water.

    • Allow the filters to dry thoroughly.

    • Dip the filters in clean engine oil, and squeeze out any excess oil.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membro da: 01/03/18

254.555 Reputazione

529 Guide realizzate

Team

iFixit Membro di iFixit

Staff

136 Membri

17.420 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 330