Homedics UHE-CMP15 Battery Replacement

Introduzione

If you believe the battery in your device may be faulty, follow this guide to access the battery compartment. For this guide, you will need a thin Phillip's head screwdriver, tweezers, and a soldering iron once you get to the battery itself.

Cosa ti serve

Passo 1 Battery

Homedics UHE-CMP15 Battery Replacement, Battery: passo 1, immagine 1 di 1

Make sure your device is turned off by pressing the power button and ensuring the LED lights are off.
Unscrew top from the container by twisting the top of the container counter clockwise and pulling up.

Modifica

Passo 2

Flip the top portion upside down and remove the wick and wick holder.
To remove the wick pull on the wick holder and it should pop right off.

Modifica

Passo 3

Attrezzo utilizzato in questo passaggio:

Tweezers

$4.99

Compra

Using tweezers and or the spudging tool lift 3 small white rubber caps, pry underneath them and pull to remove them.
This reveals the three screws holding the cap in place.

Modifica

Passo 4

Unscrew and remove the 3 screws with a Philips head screwdriver. The screwdriver must be very long and thin.
Tilting the device upside down will slide the unscrewed screws out from the holes they are in after they are loosened.

Modifica

Passo 5

Homedics UHE-CMP15 Battery Replacement: passo 5, immagine 3 di 3

The top portion will now be able to be removed to reveal the inside of the battery compartment.
The battery is glued to the side wall with an adhesive pad.
This battery is hardwired in, and will require skill in soldering/wiring and the ability to find a suitable replacement.