Aggiusta la tua roba Comunità Store

Holmes HEH8031 Power Cord Replacement

Introduzione

This guide will show how to safely remove and replace a faulty power cord on the Holmes HEH8031 space heater.

Cosa ti serve

  1. Holmes HEH8031 Power Cord Replacement, Housing: passo 1, immagine 1 di 1

    • Ensure the device is unplugged from the wall outlet.

    Traduci

  2. Holmes HEH8031 Power Cord Replacement: passo 2, immagine 1 di 1

    • Remove eight 12-mm Phillips #2 screws from the back cover.

    Traduci

  4. Holmes HEH8031 Power Cord Replacement: passo 3, immagine 1 di 2 Holmes HEH8031 Power Cord Replacement: passo 3, immagine 2 di 2

    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

    Traduci

  5. Holmes HEH8031 Power Cord Replacement, Power Cord: passo 4, immagine 1 di 3 Holmes HEH8031 Power Cord Replacement, Power Cord: passo 4, immagine 2 di 3 Holmes HEH8031 Power Cord Replacement, Power Cord: passo 4, immagine 3 di 3

    • Decrimp the wire nuts from both wire connections.

    • Remove wire nuts to expose wire strands.

    • Separate all connected wires.

    Traduci

  6. Holmes HEH8031 Power Cord Replacement: passo 5, immagine 1 di 3 Holmes HEH8031 Power Cord Replacement: passo 5, immagine 2 di 3 Holmes HEH8031 Power Cord Replacement: passo 5, immagine 3 di 3

    • Pull on the cord from the outside of the heater with great finesse. At the same time, push the cord clamp out of the housing from the inside.

    • Separate the two halves of the cord clamp and remove from cord.

    Traduci

  7. Holmes HEH8031 Power Cord Replacement: passo 6, immagine 1 di 2 Holmes HEH8031 Power Cord Replacement: passo 6, immagine 2 di 2

    • Prepare the replacement cord by cutting the negative branch (black) at least 8 inches shorter than the positive branch (white).

    • Strip at least 3/4 inch of insulation from the cord to expose bare wire.

    • Twist wire ends to form a tight braid.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Deanna Jack

Membro da: 10/12/16

333 Reputazione

4 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

IUPUI, Team 2-1, Baechle Fall 2016 Membro di IUPUI, Team 2-1, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G1

4 Membri

16 Guide realizzate

Un commento

Are there substitute power cord for Holmes HEH8031 power cord replacement?

Terri Allen - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,918