Salta al contenuto principale

Hipstreet Equinox 2 Camera Replacement

Cosa ti serve

  1. Hipstreet Equinox 2 Camera Replacement, Rear Case: passo 1, immagine 1 di 1
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Camera Replacement: passo 2, immagine 1 di 1
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Camera Replacement, Camera: passo 3, immagine 1 di 1
    • Lift the tab on the wire ribbon shown here

  4. Hipstreet Equinox 2 Camera Replacement: passo 4, immagine 1 di 1
    • Pull up gently on the camera housing shown on this picture, it is glued in place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Clemson, Team 15-8, Shirley Winter 2015 Membro di Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

5 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 124