Aggiusta la tua roba Comunità Store

Health o Meter HDR743 Power Supply Replacement

Cosa ti serve

  1. Health o Meter HDR743 Power Supply Replacement, Power Supply: passo 1, immagine 1 di 1

    • Connect a voltmeter at the power supply’s connection to the circuit board and the power supply.

    • If the the voltage at the power supply is incorrect, the power supply should be replaced.

    Modifica

  2. Health o Meter HDR743 Power Supply Replacement: passo 2, immagine 1 di 1

    • Use wire strippers to cut the wired connection to the power supply.

    • If the wires need replacing, you will need to use a soldering iron and remove the connections at the board.

    Modifica

  4. Health o Meter HDR743 Power Supply Replacement: passo 3, immagine 1 di 1

    • Use the wire strippers to cut off the rubber ends of the power supply wires.

    • Use a soldering iron and solder to fuse the connections between the two wires.

    Modifica

  5. Health o Meter HDR743 Power Supply Replacement: passo 4, immagine 1 di 2 Health o Meter HDR743 Power Supply Replacement: passo 4, immagine 2 di 2

    • Test the power supply once the wires have been reconnected.

    • If the Health o Meter still has power issues, check the connections between the new power supply and the board.

    • If no issues are found, the circuit board may need to be replaced.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 6

Tutti i Tempi: 123