Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total) Remove the two 7mm screws.
    • Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total)

    • Remove the two 7mm screws.

  2. Use a plastic opening tool to pull the plastic screen bezel forward. Remove the 4 7mm screws in the corners holding the screen up. Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.
    • Use a plastic opening tool to pull the plastic screen bezel forward.

    • Remove the 4 7mm screws in the corners holding the screen up.

    • Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.

  3. Peel off the tape that connects the chord to the screen. Carefully unplug chord.
    • Peel off the tape that connects the chord to the screen.

    • Carefully unplug chord.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Desiree Mora

Membro da: 14/02/2018

289 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S6-G6, Eyestone Spring 2018 Membro di USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 143