Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Hasee Z7M-i78172D1 Graphic Card Fan Replacement

Cosa ti serve

  1. Hasee Z7M-i78172D1 Graphic Card Fan Replacement, Rear Panel: passo 1, immagine 1 di 1
    • Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.

  2. Hasee Z7M-i78172D1 Graphic Card Fan Replacement: passo 2, immagine 1 di 3 Hasee Z7M-i78172D1 Graphic Card Fan Replacement: passo 2, immagine 2 di 3 Hasee Z7M-i78172D1 Graphic Card Fan Replacement: passo 2, immagine 3 di 3
    • Use a plastic opening tool to take off the back plastic panel.

  3. Hasee Z7M-i78172D1 Graphic Card Fan Replacement, Graphic Card Fan: passo 3, immagine 1 di 3 Hasee Z7M-i78172D1 Graphic Card Fan Replacement, Graphic Card Fan: passo 3, immagine 2 di 3 Hasee Z7M-i78172D1 Graphic Card Fan Replacement, Graphic Card Fan: passo 3, immagine 3 di 3
    • To take out the Graphics card fan it is necessary to disconnect the two Graphic card fan cables. Use a plastic opening tool to remove the cable.

  4. Hasee Z7M-i78172D1 Graphic Card Fan Replacement: passo 4, immagine 1 di 1
    • Use a #0 Phillips head screwdriver and unscrew the five 7mm screws holding the fan in place.

  5. Hasee Z7M-i78172D1 Graphic Card Fan Replacement: passo 5, immagine 1 di 2 Hasee Z7M-i78172D1 Graphic Card Fan Replacement: passo 5, immagine 2 di 2
    • Lift the Graphics card fan out and replace with the replacement fan.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Zachary Gay

Membro da: 02/14/18

124 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S6-G6, Eyestone Spring 2018 Membro di USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 369