1. Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
    • Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.

  2. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel.
    • Use a plastic opening tool to take off the back plastic panel.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.
    • Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.

  5. Gently pry off the connecting wires with the plastic opening tool. Gently pry off the connecting wires with the plastic opening tool.
    • Gently pry off the connecting wires with the plastic opening tool.

  6. Lift the battery out. Lift the battery out.
    • Lift the battery out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Desiree Mora

Membro da: 14/02/2018

265 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S6-G6, Eyestone Spring 2018 Membro di USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 Membri

6 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 63