Hasbro Bop-It Micro Series Battery Replacement

Introduzione

There are no previous steps needed. All that is required is a #0 Phillips Screwdriver, (2) fresh AAA batteries, and a few minutes of time.

Unscrew the (2) #4 Phillips head 8 mm screws on the back cover using a Phillips #0 screwdriver. The screws are captured and do not need to be completely removed from the back cover.

The batteries are now accessible. Remove batteries using fingers or plastic spudger.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Membro da: 09/29/16

139 Reputazione

2 Guide realizzate

IUPUI-HARLEY-F16S3G1

3 Membri

10 Guide realizzate

uh can you do one for the 2016 bop it