Harman Kardon Invoke Power Port Replacement

Introduzione

This guide will help you to replace the power port of Harman Kardon Invoke. You may replace the power port if you faced a weak port that will affect the efficiency of the Invoke or a broken/old port that prevents the invoke from connecting to power. By replacing the power port, the Invoke should be connecting to the power perfectly.

Cosa ti serve

Passo 1 Power Port

Harman Kardon Invoke Power Port Replacement, Power Port: passo 1, immagine 1 di 2

Harman Kardon Invoke Power Port Replacement, Power Port: passo 1, immagine 2 di 2

Use a metal spudger to remove the rubber base.

Modifica

Passo 2

Use a T10 Torx screwdriver to remove the four 14 mm screws.

Modifica

Passo 3

Grip the bottom firmly and wiggle upwards to remove it.

Modifica

Passo 4

Harman Kardon Invoke Power Port Replacement: passo 4, immagine 3 di 3

Use a T10 Torx screwdriver to remove two 10 mm screws from the board that is attached to the ports.
Pull the board up lightly.

Modifica

Passo 5

Pull the cable to disconnect the board from the device.
To replacement the service port, you will have to replace the whole board that the port is attached to.

Modifica