Salta al contenuto principale

Hannspree Hannspad SN1AT71 Back Panel Replacement

Cosa ti serve

  1. Hannspree Hannspad SN1AT71 Back Panel Replacement, Back Panel: passo 1, immagine 1 di 1
    • Place the tablet screen side up.

    • Make sure the device is turned off to avoid damage.

  2. Hannspree Hannspad SN1AT71 Back Panel Replacement: passo 2, immagine 1 di 2 Hannspree Hannspad SN1AT71 Back Panel Replacement: passo 2, immagine 2 di 2
    • Use the metal spudger to press an opening between the screen and back cover.

    • The plastic tabs are located on each corner of the back cover.

    • Be careful, as the plastic tabs are delicate.

  3. Hannspree Hannspad SN1AT71 Back Panel Replacement: passo 3, immagine 1 di 1
    • Wedge the plastic opening tool between the screen and the back panel to prevent re-engagement

  4. Hannspree Hannspad SN1AT71 Back Panel Replacement: passo 4, immagine 1 di 2 Hannspree Hannspad SN1AT71 Back Panel Replacement: passo 4, immagine 2 di 2
    • Slide the metal spudger around the casing to separate it from the inside of the tablet.

  5. Hannspree Hannspad SN1AT71 Back Panel Replacement: passo 5, immagine 1 di 2 Hannspree Hannspad SN1AT71 Back Panel Replacement: passo 5, immagine 2 di 2
    • Flip the tablet over so the screen side is down after all the tabs are separated.

    • Remove the back panel by delicately lifting it straight up.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 15

Tutti i Tempi: 2,375