Salta al contenuto principale

Handspring Visor Deluxe PDA Touch Screen Replacement

Cosa ti serve

  1. Handspring Visor Deluxe PDA Touch Screen Replacement, Outside cover and stylus: passo 1, immagine 1 di 2 Handspring Visor Deluxe PDA Touch Screen Replacement, Outside cover and stylus: passo 1, immagine 2 di 2
    • Remove the outer screen cover by releasing the top clip from the main body of the device.

  2. Handspring Visor Deluxe PDA Touch Screen Replacement: passo 2, immagine 1 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 2, immagine 2 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 2, immagine 3 di 3
    • Pull out the stylus from the top right corner of the device.

  3. Handspring Visor Deluxe PDA Touch Screen Replacement: passo 3, immagine 1 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 3, immagine 2 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 3, immagine 3 di 3
    • Slide the memory cartridge cover up and off the device.

  4. Handspring Visor Deluxe PDA Touch Screen Replacement, Batteries: passo 4, immagine 1 di 2 Handspring Visor Deluxe PDA Touch Screen Replacement, Batteries: passo 4, immagine 2 di 2
    • Remove the battery cover by releasing the clip from the main body of the device.

  5. Handspring Visor Deluxe PDA Touch Screen Replacement: passo 5, immagine 1 di 1
    • Remove the batteries from the device.

  6. Handspring Visor Deluxe PDA Touch Screen Replacement, Back Cover: passo 6, immagine 1 di 1
    • Unscrew the four 2.94mm screws with a #00 Phillips screwdriver.

    • One end of the OEM stylus can unscrew and contains a mini #00 Phillips screwdriver.

  7. Handspring Visor Deluxe PDA Touch Screen Replacement: passo 7, immagine 1 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 7, immagine 2 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 7, immagine 3 di 3
    • Use the spudger to pry open the casing by applying pressure at 4 clips on both sides of the device.

    • Be careful while opening the casing as there is a flex strip connecting the two halves.

  8. Handspring Visor Deluxe PDA Touch Screen Replacement: passo 8, immagine 1 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 8, immagine 2 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement: passo 8, immagine 3 di 3
    • Disconnect the flex strip from the motherboard with tweezers.

  9. Handspring Visor Deluxe PDA Touch Screen Replacement, Touch Screen: passo 9, immagine 1 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement, Touch Screen: passo 9, immagine 2 di 3 Handspring Visor Deluxe PDA Touch Screen Replacement, Touch Screen: passo 9, immagine 3 di 3
    • Release the latch in bottom right corner of the touchscreen.

    • Use the spudger (if needed) to pry the screen from the front case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 1-2, Regan SU 2012 Membro di Cal Poly, Team 1-2, Regan SU 2012

CPSU-REGAN-SU12S1G2

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 10

Tutti i Tempi: 826