Aggiusta la tua roba Comunità Store

Hamilton-T1 Air Intake and Fan Filter Replacement

Attrezzature medicali
Né iFixit né questa guida di riparazione sono approvati dal produttore del dispositivo medicale o affiliati ad esso.

Introduzione

This guide was created to assist in either the replacement or maintenance of the various filters contained within the ventilator. Regular checks and maintenance will allow for smooth operation of the ventilator.

NOTES:

  • The side fan filter and rear intake filter can be replaced or washed with soap and water before reuse
  • The HEPA filter must be replaced

Cosa ti serve

  1. Hamilton-T1 Air Intake and Fan Filter Replacement, Air Intakes and HEPA Filter: passo 1, immagine 1 di 1

    • The fan filter is located on the side of the ventilator and can be removed and replaced by hand.

    Traduci

  2. Hamilton-T1 Air Intake and Fan Filter Replacement: passo 2, immagine 1 di 1

    • The air intake filter is located on the rear of the device, and can also be removed by hand.

    Traduci

  3. Hamilton-T1 Air Intake and Fan Filter Replacement: passo 3, immagine 1 di 1

    • To access the HEPA filter, first remove the screw holding the filter cover in place and gently remove the cover.

    Traduci

  4. Hamilton-T1 Air Intake and Fan Filter Replacement: passo 4, immagine 1 di 1

    • The HEPA filter can now be removed by hand.

    • Install a new HEPA filter and reattach the back panel.

    • Be sure to test the device and ensure airflow through all filters before use.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Trevor Foley

Membro da: 04/10/20

114 Reputazione

1 Guida realizzata

Distintivi: 3

Team

Cal Poly, Team S11-G24, Paton Spring 2020 Membro di Cal Poly, Team S11-G24, Paton Spring 2020

CPSU-PATON-S20S11G24

3 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 22

Tutti i Tempi: 614