Aggiusta la tua roba Comunità Store

Hamilton Beach 51101BA Blades Replacement

Introduzione

After using this guide you will learn how to replace the blades in your blender. You will need to use basic tools to complete this guide.

Cosa ti serve

  1. Hamilton Beach 51101BA Blades Replacement, Blades: passo 1, immagine 1 di 1

    • Remove the lid from the container by holding the base and pulling up on the lid.

    Modifica

  2. Hamilton Beach 51101BA Blades Replacement: passo 2, immagine 1 di 3 Hamilton Beach 51101BA Blades Replacement: passo 2, immagine 2 di 3 Hamilton Beach 51101BA Blades Replacement: passo 2, immagine 3 di 3

    • Remove the container from the blender.

    • Hold the blender and the container, then twist the container in a clockwise motion.

    • Make sure to follow the lock and unlock markings on the container.

    Modifica

  4. Hamilton Beach 51101BA Blades Replacement: passo 3, immagine 1 di 3 Hamilton Beach 51101BA Blades Replacement: passo 3, immagine 2 di 3 Hamilton Beach 51101BA Blades Replacement: passo 3, immagine 3 di 3

    • Avoid placing your fingers on the blade, as they could be sharp.

    • Using a pair of pliers to hold the blade in place, use your other hand to unscrew the rubber piece on the bottom of the container.

    • Remove the rubber piece and the two washers by rotating the rubber piece counter-clockwise.

    Modifica

  5. Hamilton Beach 51101BA Blades Replacement: passo 4, immagine 1 di 1

    • Carefully, pull the blades out of the container as they are very sharp.

    • Using the pliers, remove blades and the washer around the blade shaft.

    Modifica
Conclusione

To reassemble your device with the new blade assembly, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Brandon Nunez

Membro da: 08/28/15

283 Reputazione

2 Guide realizzate

Distintivi: 11

+8 altri distintivi

Team

USF Tampa, Team 2-5, Sullivan Fall 2015 Membro di USF Tampa, Team 2-5, Sullivan Fall 2015

USFT-SULLIVAN-F15S2G5

4 Membri

5 Guide realizzate

3 Commenti

Need to know how to install parts and how many

papi3701@aol.com - Replica

Looks like I missed parts need to know the order son cuantaty

papi3701@aol.com - Replica

For my 501101B blender, the whole blade assembly popped out, so the blended smoothie draws at the bottom like a water falls How to fix this?

Joyful Joy - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 95

Tutti i Tempi: 11,495