HVAC Filter Replacement

Introduzione

This guide is for filter replacement of air conditioning. This replacement is needed to allow proper airflow while preventing particles from leaving the vent. I purchased the filter in Home Depot. Make sure to know the dimensions of the vent opening as there are filters with different dimensions. Additionally, there are 5 categories of filters and are rated by how effective they are. I bought a filter with a score of 9 out of 10 so choose one that meets your budget.

Cosa ti serve

Passo 1 Filter

HVAC Filter Replacement, Filter: passo 1, immagine 1 di 1

Observe your air conditioning vent. If the filter appears to be dirty or damaged, then it is time to change it.

Modifica

Passo 2

Remove the screws on the vent cover. There should be a minimum of 4 screws in each corner of the vent.
The screws in this vent are phillips hex head screws that are 1 3/4 in. long.

Modifica

Passo 3

Grab a screwdriver with a hex head attachment to remove the screws. Grab the screwdriver and place it on the head of the screw. Twist in a counterclockwise motion until the screw is removed. Repeat for every screw.

Modifica

Passo 4

Remove the vent cover to access the ventilation filter.

Modifica

Passo 5

Optional: Put on a latex glove on the hand that you will use to remove the filter.

Modifica

Passo 6

Remove the filter carefully.
Make sure to remove it slowly so that the dust does not come of it.

Modifica

Passo 7

Dispose of the old filter in a waste bin.

Modifica

Passo 8

Buy a Honeywell Air Filter from Home Depot and make sure to buy the filter with the correct dimensions.
The dimensions for filters will vary depending on the dimensions of the vent.
In this case, my vent was 14x25x1 and thus needed a filter with the same dimensions.

Modifica

Passo 9

Place the new filter into the vent opening. Make sure that it is facing the right direction.
There will be an arrow on the side of the filter showing which way to place it.

Modifica

Passo 10

Place vent cover.

Modifica

Passo 11

Grab the same screws that were taken out at Step 3 and use them to secure the vent cover.
Place the screwdriver on the head of the screw and twist in a clockwise motion until screw is secure.
Repeat for every screw.

Modifica

Passo 12

Turn on your air conditioner to make sure the filter does not move.
If the filter does not move, then you have successfully replaced the filter of your air conditioner.

Modifica