Introduzione

If the cell phone is not charging correctly with different USB chargers, the charging port may be the cause of the issue.

  1. Turn off your cell phone before disassembling.
    • Turn off your cell phone before disassembling.

    Aggiungi Commento

  2. Remove the two 1.17mm Torx T3 screws from the bottom of the phone.
    • Remove the two 1.17mm Torx T3 screws from the bottom of the phone.

    Aggiungi Commento

    • Use the Sim card ejection tool to remove both the sim card trays.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • To prepare the iOpener insert it in the microwave for 30 seconds and apply it on the side edges of the phone so that the glue underneath will soften.

    Aggiungi Commento

    • Pry off the back with a plastic opening tool.

    Aggiungi Commento

    • Remove the six 1.5mm Phillips #000 screws from the bottom of the phone.

    Aggiungi Commento

    • Use a plastic opening tool to disconnect the white and black antenna cables from the daughterboard.

    Aggiungi Commento

    • Remove the daughterboard.

    Aggiungi Commento

    • Either desolder the Micro USB port, or replace the whole daughterboard.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Klara Asllani

Membro da: 25/01/2018

647 Reputazione

5 Guide realizzate

Team

USF Tampa, Team S7-G6, Passmore Spring 2018 Membro di USF Tampa, Team S7-G6, Passmore Spring 2018

USFT-PASSMORE-S18S7G6

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 58

Tutti i Tempi: 272