Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

HTC Wizard 200 Front Buttons Replacement

Cosa ti serve

  1. HTC Wizard 200 Front Buttons Replacement, Battery: passo 1, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement, Battery: passo 1, immagine 2 di 2
    • To expose the battery, remove the outer case with your fingernail.

    • Remove the battery by pulling the black tab.

  2. HTC Wizard 200 Front Buttons Replacement, Back Panel: passo 2, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • Insert the flat end of the spudger into the two notches on the back of the camera cover and pry them up.

  3. HTC Wizard 200 Front Buttons Replacement: passo 3, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 3, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • Work the spudger around the edges of the camera cover until it comes off.

  4. HTC Wizard 200 Front Buttons Replacement: passo 4, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 4, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    T5 Torx Screwdriver
    $5.49
    Compra
    • Remove the four 6 mm screws with the T5 Torx screwdriver.

    • One of the screws is under the "void" sticker.

  5. HTC Wizard 200 Front Buttons Replacement: passo 5, immagine 1 di 3 HTC Wizard 200 Front Buttons Replacement: passo 5, immagine 2 di 3 HTC Wizard 200 Front Buttons Replacement: passo 5, immagine 3 di 3
    • Insert the flat end of an iFixit opening tool between the side and inner covers to create a gap.

    • Work the tool around the edges until all the clips release.

  6. HTC Wizard 200 Front Buttons Replacement: passo 6, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 6, immagine 2 di 2
    • Once all the clips are open, remove the inner panel from the phone.

  7. HTC Wizard 200 Front Buttons Replacement, Motherboard: passo 7, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • Use the spudger to pry the camera off.

  8. HTC Wizard 200 Front Buttons Replacement: passo 8, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 8, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra
    • Using tweezers, flip the connector latch away from the motherboard.

    • Detach the flexible connection from under the connector latch.

  9. HTC Wizard 200 Front Buttons Replacement: passo 9, immagine 1 di 1
    • Slide the keyboard into the open position.

  10. HTC Wizard 200 Front Buttons Replacement: passo 10, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 10, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Spudger
    $3.99
    Compra
    • Lift the motherboard out of the case using the spudger.

    • Expose the underside of the motherboard using your hands.

  11. HTC Wizard 200 Front Buttons Replacement: passo 11, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 11, immagine 2 di 2
    • Remove the flexible connection from the motherboard.

    • Caution: Removing the connection too fast may cause damage to the connection and cables.

  12. HTC Wizard 200 Front Buttons Replacement, Keyboard Slider: passo 12, immagine 1 di 3 HTC Wizard 200 Front Buttons Replacement, Keyboard Slider: passo 12, immagine 2 di 3 HTC Wizard 200 Front Buttons Replacement, Keyboard Slider: passo 12, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    T5 Torx Screwdriver
    $5.49
    Compra
    • Remove the four 5mm screws with the T5 Torx screwdriver.

    • Remove the keyboard slider from the main body.

  13. HTC Wizard 200 Front Buttons Replacement, Screen Cover: passo 13, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement, Screen Cover: passo 13, immagine 2 di 2
    • Use the T5 Torx screwdriver to remove four 5mm screws that secure the back of the screen casing.

  14. HTC Wizard 200 Front Buttons Replacement: passo 14, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 14, immagine 2 di 2
    • Insert the plastic opening tool between the front panel and the rear panel and pry open to reach the screen.

  15. HTC Wizard 200 Front Buttons Replacement: passo 15, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 15, immagine 2 di 2
    • Once the rear panel is loose, lift it off of the front panel.

    • The flexible connection will pop loose.

  16. HTC Wizard 200 Front Buttons Replacement: passo 16, immagine 1 di 1
    • Device rotated 90 degrees CCW.

    • Remove the yellow anti-static tape.

  17. HTC Wizard 200 Front Buttons Replacement: passo 17, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement: passo 17, immagine 2 di 2
    • Unscrew the two 3mm phillips #0 screws from the bottom of the device that secure the rigid flex board to the screen panel.

  18. HTC Wizard 200 Front Buttons Replacement: passo 18, immagine 1 di 1
    • Device rotated 180 degrees CW.

    • Unscrew the two 3mm phillips #0 screws from the top of the device that secure the rigid flex board to the screen panel.

  19. HTC Wizard 200 Front Buttons Replacement: passo 19, immagine 1 di 1
    • Device rotated 90 degrees CCW.

    • Unhinge the flexible connection and use the tweezers to disconnect.

  20. HTC Wizard 200 Front Buttons Replacement: passo 20, immagine 1 di 1
    • Now that the rigid flex board is loose, remove it from the screen.

  21. HTC Wizard 200 Front Buttons Replacement, LCD Screen: passo 21, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement, LCD Screen: passo 21, immagine 2 di 2
    • Simply pull out the loose screen.

  22. HTC Wizard 200 Front Buttons Replacement, Front Buttons: passo 22, immagine 1 di 2 HTC Wizard 200 Front Buttons Replacement, Front Buttons: passo 22, immagine 2 di 2
    • Pull out the front button panel.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kyle Champ

Membro da: 10/03/11

225 Reputazione

12 Guide realizzate

Team

Cal Poly, Team 20-27, Maness Fall 2011 Membro di Cal Poly, Team 20-27, Maness Fall 2011

CPSU-MANESS-F11S20G27

4 Membri

24 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 587