Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Take the back cover off the phone and take the battery out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Take a SL#2.5 screwdriver and pop the black piece off shown here.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Take a T5 screwdriver and unscrew the two screws seen here
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the two screws on the back of the phone with a T5 screwdriver
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Take the SL#2.5 screwdriver and pry off the back cover
-
The phone should now look like the second picture
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Next lift up the camera lens from the board.
-
Then pry off the circuit circled in red on the second picture
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone
-
The circuit board should now be detached from the LCD part of the phone
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Next take the SL#2.5 screwdriver and pry the grey fabric sticker off on the LCD side of the phone
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Next take the SL#2.5 screwdriver and pry the screen from the front plastic cover
-
The screen should come out with ease and be completely detached from the rest of the cover.
-