Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the phone over to have the rear cover facing up.
-
The camera lens should be towards the top of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the cover up, towards the top of phone, to unlock the battery cover.
-
Lift the cover off phone and remove it.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use your finger to push the top of the battery downwards and lift the battery out of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the six Torx #5 screws that are securing the rear frame.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Plastic Cards$2.99-
Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the single Phillips #0 screw that is securing the motherboard to the front case of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pry the motherboard away from the front of the plastic case using a plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the plastic cover from the LCD display and the motherboard.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.