Salta al contenuto principale

HTC One Max Fingerprint Sensor Replacement

Cosa ti serve

  1. HTC One Max Fingerprint Sensor Replacement, Back Case: passo 1, immagine 1 di 1
    • Lift back cover while pressing highlighted release switch towards the center of the phone.

  2. HTC One Max Fingerprint Sensor Replacement: passo 2, immagine 1 di 2 HTC One Max Fingerprint Sensor Replacement: passo 2, immagine 2 di 2
    • Remove the four white stickers in each corner that cover the Tri-Wing screws.

    • Remove the white sticker near the buttons that control the volume.

    • Remove the white sticker near the SIM card.

    • Remove the big white sticker with the bar-code in the center of the phone.

  3. HTC One Max Fingerprint Sensor Replacement: passo 3, immagine 1 di 1
    • Remove the thirteen Tri-Wing Y00 screws (Upper & Lower screws are 5 mm length, middle screws are 3.8 mm length) from the back case.

    • Disconnect the cable near the volume buttons.

  4. HTC One Max Fingerprint Sensor Replacement: passo 4, immagine 1 di 2 HTC One Max Fingerprint Sensor Replacement: passo 4, immagine 2 di 2
    • Use the small plastic opening tool to pry between the screen and the rear case.

  5. HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: passo 5, immagine 1 di 2 HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: passo 5, immagine 2 di 2
    • Use Tweezers to disconnect the ribbon cable connecting the fingerprint sensor to the motherboard.

    • When replacing the fingerprint sensor, make sure the ribbon cable snaps into the port on the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 11-3, Blackwell Fall 2014 Membro di USF Tampa, Team 11-3, Blackwell Fall 2014

USFT-BLACKWELL-F14S11G3

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 6

Tutti i Tempi: 1,261