Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Has your HTC Desire 610 stopped vibrating? Follow these steps to replace the faulty vibration motor. You will learn how to take off the back, unscrew the circuit cover, unplug the vibration harness, and put in a new motor.

  1. Using a plastic opening tool, take off the back cover of the phone. Using a plastic opening tool, take off the back cover of the phone. Using a plastic opening tool, take off the back cover of the phone.
    • Using a plastic opening tool, take off the back cover of the phone.

  2. Remove the four black 4mm torx screws using the Torx T5 bit.
    • Remove the four black 4mm torx screws using the Torx T5 bit.

  3. Remove the four silver 5mm torx head screws using the Torx T5 screwdriver.
    • Remove the four silver 5mm torx head screws using the Torx T5 screwdriver.

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  5. Remove the two 2.5mm phillips head screws using the Phillips 000 screwdriver.
    • Remove the two 2.5mm phillips head screws using the Phillips 000 screwdriver.

  6. Remove the black plastic circuit cover using a plastic opening tool.
    • Remove the black plastic circuit cover using a plastic opening tool.

  7. Pull the wire harness from the circuit board that is connected to the vibration motor using a pair of precision tweezers. Be careful! Damaging this port could prevent a new vibration motor from functioning.
    • Pull the wire harness from the circuit board that is connected to the vibration motor using a pair of precision tweezers.

    • Be careful! Damaging this port could prevent a new vibration motor from functioning.

  8. Pry the vibration motor from it's housing using precision tweezers. The vibration motor is held in place with adhesive, so you may need to pry a little harder to remove it.
    • Pry the vibration motor from it's housing using precision tweezers.

    • The vibration motor is held in place with adhesive, so you may need to pry a little harder to remove it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kaycee Hammond

Membro da: 11/02/2017

249 Reputazione

2 Guide realizzate

Team

IUPUI, Team S1-G1, Wilson Spring 2017 Membro di IUPUI, Team S1-G1, Wilson Spring 2017

IUPUI-WILSON-S17S1G1

4 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 305