Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using plastic opening or prying tool, take off the back cover of the phone.
-
The SD slot opens an area where the edge of the back is exposed and can be pried open easily.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using Phillips 000 Screwdriver, remove the two 2.5mm phillips head screws.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using Torx T5 screwdriver, remove the four silver 5mm torx head screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using Torx T5 bit size, remove the four black 4mm torx screws
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using plastic opening or prying tool, remove the black plastic circuit cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using small plastic opening tool, disconnect the wire connection. Do this by carefully inserting tool under wires and pulling straight up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the plastic opening tool - you can use a larger one, or keep using the small one - to pry out the battery.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.
3 Commenti
@simon and anybody, Another suggestion is to control the connect cable screen which passes under the battery and plugs upside down under the motherboard because it is frequent that it disconnects when we remove the old battery and the smartphone no longer restarts Next.
Thank you very much to the author of this tutorial which I serve me for a friend in January 2024