Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Make sure the computer is unplugged.

    • Be sure to touch any metal surface with your hand to discharge any static electricity that might have built up.

    • Make sure all auxiliary cords are disconnected from the desktop. If not, remove them using your hands.

    • Set the desktop down horizontally with the front side facing you.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 2 : passo 2, immagine 2 di 2
    • Hold the desktop with two hands by grasping both sides of the desktop.

    • Press the buttons on both sides using your index fingers.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 3 : passo 3, immagine 2 di 3 : passo 3, immagine 3 di 3
    • Slide the top cover about an inch forward using your thumb to push it towards you.

    • Make sure that the bottom is still secured by both hands.

    • Lay the desktop back on the table and pull the case forward as far as it can go.

    • Lift the cover up and off.

Linea Traguardo

Altre 11 persone hanno completato questa guida.

Alyssa Briones

Membro da: 01/21/14

1.699 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 6-23, Maness Winter 2014 Membro di Cal Poly, Team 6-23, Maness Winter 2014

CPSU-MANESS-W14S6G23

4 Membri

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 26

Ultimi 30 Giorni: 95

Tutti i Tempi: 21,562