Salta al contenuto principale

Introduzione

This guide will show you what needs to be removed and how to remove it in order to replace the power supply of the HP M8226x. When buying a new power supply, make sure it has both SATA port and 4-pin power connectors on it and has an output of at least 350W.

  1. Turn off your computer and remove the power cord by pulling it straight out of its socket. Turn off your computer and remove the power cord by pulling it straight out of its socket. Turn off your computer and remove the power cord by pulling it straight out of its socket.
    • Turn off your computer and remove the power cord by pulling it straight out of its socket.

  2. Remove the two screws holding the right (from the back) case door to the computer. Remove the two screws holding the right (from the back) case door to the computer. Remove the two screws holding the right (from the back) case door to the computer.
    • Remove the two screws holding the right (from the back) case door to the computer.

  3. Remove the side case door by pulling the tab towards the back of the computer with your hand. Pull the door outward to remove it. Pull the door outward to remove it.
    • Remove the side case door by pulling the tab towards the back of the computer with your hand.

    • Pull the door outward to remove it.

  4. Remove the four screws holding in the power supply. Remove the four screws holding in the power supply.
    • Remove the four screws holding in the power supply.

  5. Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now

    Kit di riparazione batterie iPhone

    Solo $29.99

    Buy Now
  6. Lay the computer on its side to make it easier to remove the wiring.
    • Lay the computer on its side to make it easier to remove the wiring.

  7. Remove the computer processor's power cord by pinching the clip on the connector and pulling it straight out. Remove the computer processor's power cord by pinching the clip on the connector and pulling it straight out. Remove the computer processor's power cord by pinching the clip on the connector and pulling it straight out.
    • Remove the computer processor's power cord by pinching the clip on the connector and pulling it straight out.

  8. Remove the power cord from the optical disc drive by pulling it straight out. Remove the power cord from the optical disc drive by pulling it straight out. Remove the power cord from the optical disc drive by pulling it straight out.
    • Remove the power cord from the optical disc drive by pulling it straight out.

  9. If the hard drive doesn't have a SATA port connector then move to step 9. Disconnect the SATA port connector from the hard drive by pulling it straight out. Disconnect the SATA port connector from the hard drive by pulling it straight out.
    • If the hard drive doesn't have a SATA port connector then move to step 9.

    • Disconnect the SATA port connector from the hard drive by pulling it straight out.

  10. If the hard drive has a 4-pin Molex connector, pinch the two clips on the connector and pull it straight out to remove it. If the hard drive has a 4-pin Molex connector, pinch the two clips on the connector and pull it straight out to remove it.
    • If the hard drive has a 4-pin Molex connector, pinch the two clips on the connector and pull it straight out to remove it.

  11. Remove the power to the motherboard by pinching the clip and pulling it straight out. Remove the power to the motherboard by pinching the clip and pulling it straight out. Remove the power to the motherboard by pinching the clip and pulling it straight out.
    • Remove the power to the motherboard by pinching the clip and pulling it straight out.

  12. Remove the power supply by pushing it out from the back of the computer and lifting it out of the computer. Remove the power supply by pushing it out from the back of the computer and lifting it out of the computer.
    • Remove the power supply by pushing it out from the back of the computer and lifting it out of the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Scott Fisher

Membro da: 30/03/2016

101 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 259