Salta al contenuto principale

HP eStation Zeen Volume Buttons Replacement

Cosa ti serve

  1. HP eStation Zeen Volume Buttons Replacement, Volume Buttons: passo 1, immagine 1 di 3 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: passo 1, immagine 2 di 3 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: passo 1, immagine 3 di 3
    • Use a metal spudger to remove the four screw caps.

    • Remove the four 6 mm screws using a Philips #0 screwdriver.

  2. HP eStation Zeen Volume Buttons Replacement: passo 2, immagine 1 di 3 HP eStation Zeen Volume Buttons Replacement: passo 2, immagine 2 di 3 HP eStation Zeen Volume Buttons Replacement: passo 2, immagine 3 di 3
    • Insert a plastic opening tool and slide it along the edge to open the back panel.

    • Lift the back panel away from the device.

  3. HP eStation Zeen Volume Buttons Replacement: passo 3, immagine 1 di 1
    • Disconnect the battery clip with a plastic opening tool.

    • Be gentle as the connector is fragile.

  4. HP eStation Zeen Volume Buttons Replacement: passo 4, immagine 1 di 1
    • Remove the two 6 mm screws using a Philips #0 screwdriver.

  5. HP eStation Zeen Volume Buttons Replacement: passo 5, immagine 1 di 1
    • Pull the ribbon from the board.

    • Be gentle as the ribbon is fragile.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

dalton hale

Membro da: 09/26/16

503 Reputazione

4 Guide realizzate

Team

USF Tampa, Team 16-4, Eyestone Fall 2016 Membro di USF Tampa, Team 16-4, Eyestone Fall 2016

USFT-EYESTONE-F16S16G4

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 187