Salta al contenuto principale

HP eStation Zeen Speaker Replacement

Cosa ti serve

  1. HP eStation Zeen Speaker Replacement, Speaker: passo 1, immagine 1 di 3 HP eStation Zeen Speaker Replacement, Speaker: passo 1, immagine 2 di 3 HP eStation Zeen Speaker Replacement, Speaker: passo 1, immagine 3 di 3
    • Remove the rubber screw caps using a metal spudger.

    • Remove the two 6mm screw using a Phillips #0 screwdriver.

  2. HP eStation Zeen Speaker Replacement: passo 2, immagine 1 di 3 HP eStation Zeen Speaker Replacement: passo 2, immagine 2 di 3 HP eStation Zeen Speaker Replacement: passo 2, immagine 3 di 3
    • Unclip each side by inserting the plastic opening tool and slide it along the edges.

    • Remove the back panel by lifting the panel away from the device.

  3. HP eStation Zeen Speaker Replacement: passo 3, immagine 1 di 1
    • Disconnect battery clip.

    • The clip is very fragile.

  4. HP eStation Zeen Speaker Replacement: passo 4, immagine 1 di 1
    • Disconnect the speaker wires from the terminal using a plastic opening tool.

    • Be careful the plastic connector is fragile

  5. HP eStation Zeen Speaker Replacement: passo 5, immagine 1 di 1
    • Remove the two 6mm screws using a Phillips #0 screwdriver.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jack Clark

Membro da: 09/26/16

119 Reputazione

1 Guida realizzata

Team

USF Tampa, Team 16-4, Eyestone Fall 2016 Membro di USF Tampa, Team 16-4, Eyestone Fall 2016

USFT-EYESTONE-F16S16G4

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 175