Salta al contenuto principale

HP eStation Zeen Ground Wire Replacement

Cosa ti serve

  1. HP eStation Zeen Ground Wire Replacement, Motherboard Ground Wire: passo 1, immagine 1 di 3 HP eStation Zeen Ground Wire Replacement, Motherboard Ground Wire: passo 1, immagine 2 di 3 HP eStation Zeen Ground Wire Replacement, Motherboard Ground Wire: passo 1, immagine 3 di 3
    • Remove the screw caps using a metal spudger.

    • Remove the four 6 mm screws using a Phillips #0 screwdriver.

  2. HP eStation Zeen Ground Wire Replacement: passo 2, immagine 1 di 3 HP eStation Zeen Ground Wire Replacement: passo 2, immagine 2 di 3 HP eStation Zeen Ground Wire Replacement: passo 2, immagine 3 di 3
    • Insert a plastic opening tool into the case seam and slide it along the edges.

    • Lift and remove the back panel from the device.

  3. HP eStation Zeen Ground Wire Replacement: passo 3, immagine 1 di 1
    • Carefully disconnect the battery clip using small plastic spudger.

    • The clip is extremely fragile.

  4. HP eStation Zeen Ground Wire Replacement: passo 4, immagine 1 di 1
    • Use tweezers to disconnect the ground wire from motherboard terminal.

  5. HP eStation Zeen Ground Wire Replacement: passo 5, immagine 1 di 1
    • Use a soldering iron to remove the ground wire.

    • Avoid touching or heating the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

dalton hale

Membro da: 09/26/16

503 Reputazione

4 Guide realizzate

Team

USF Tampa, Team 16-4, Eyestone Fall 2016 Membro di USF Tampa, Team 16-4, Eyestone Fall 2016

USFT-EYESTONE-F16S16G4

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 352