Salta al contenuto principale

HP Stream 8 Motherboard Replacement

Cosa ti serve

  1. HP Stream 8 Motherboard Replacement, Midframe: passo 1, immagine 1 di 1
    • Use your nail or a spudger to pry the back cover off of the device.

  2. HP Stream 8 Motherboard Replacement: passo 2, immagine 1 di 1
    • Slide your finger around the rest of the back cover, lifting it completely off of the device.

  3. HP Stream 8 Motherboard Replacement: passo 3, immagine 1 di 1
    • Remove ten Phillips #00 screws from the inside cover.

  4. HP Stream 8 Motherboard Replacement: passo 4, immagine 1 di 1
    • Pry up the inside cover the same way as in the first step.

  5. HP Stream 8 Motherboard Replacement, Front-Facing Camera: passo 5, immagine 1 di 1
    • Lift up on the small black tab at the connection point to unlock the flex ribbon cable using the tweezers.

  6. HP Stream 8 Motherboard Replacement: passo 6, immagine 1 di 1
    • Remove the front facing camera with tweezers.

  7. HP Stream 8 Motherboard Replacement, Rear-Facing Camera: passo 7, immagine 1 di 1
    • Carefully pry up the gray metal piece on the end of the flex ribbon cable using tweezers.

  8. HP Stream 8 Motherboard Replacement: passo 8, immagine 1 di 1
    • Remove the back facing camera with the tweezers.

  9. HP Stream 8 Motherboard Replacement, Motherboard: passo 9, immagine 1 di 1
    • Carefully remove the battery connector from the system board using the tweezers.

  10. HP Stream 8 Motherboard Replacement: passo 10, immagine 1 di 1
    • Lift up on the small black tab to unlock the LCD screen flex ribbon cable using the tweezers.

  11. HP Stream 8 Motherboard Replacement: passo 11, immagine 1 di 1
    • Carefully remove the LCD screen flex ribbon cable from the system board using the tweezers.

  12. HP Stream 8 Motherboard Replacement: passo 12, immagine 1 di 1
    • Carefully remove the USB flex ribbon cable from the connection point on the system board using the tweezers.

  13. HP Stream 8 Motherboard Replacement: passo 13, immagine 1 di 1
    • Remove the two Phillips using the screwdriver with a PH00 Phillips head.

  14. HP Stream 8 Motherboard Replacement: passo 14, immagine 1 di 1
    • Remove the motherboard from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Nick Miller

Membro da: 04/11/16

669 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 34-14, Maness Spring 2016 Membro di Cal Poly, Team 34-14, Maness Spring 2016

CPSU-MANESS-S16S34G14

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 1,062