Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

HP Stream 13-c010nr Disassembly

Cosa ti serve

  1. HP Stream 13-c010nr Disassembly, HP Stream 13-c010nr Disassembly: passo 1, immagine 1 di 1
    • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

  2. HP Stream 13-c010nr Disassembly: passo 2, immagine 1 di 2 HP Stream 13-c010nr Disassembly: passo 2, immagine 2 di 2
    • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

  3. HP Stream 13-c010nr Disassembly: passo 3, immagine 1 di 2 HP Stream 13-c010nr Disassembly: passo 3, immagine 2 di 2
    • Flip the laptop over and open it up.

    • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

    • Lift up the keyboard.

    • Ribbon cables still connect the two pieces.

  4. HP Stream 13-c010nr Disassembly: passo 4, immagine 1 di 1
    • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

    • Pull up the ribbon cables from their sockets.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

USF Tampa, Team S1-G3, Cagle Spring 2018 Membro di USF Tampa, Team S1-G3, Cagle Spring 2018

USFT-CAGLE-S18S1G3

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 17

Ultimi 30 Giorni: 60

Tutti i Tempi: 3,462