Introduzione

This guide will show you how to disassemble a HP Stream 13-c010nr laptop.

  1. Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.
    • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

    Aggiungi Commento

  2. Remove the thirteen 5mm Phillips #0 screws from the bottom case.
    • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

    Aggiungi Commento

    • Flip the laptop over and open it up.

    • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

    • Lift up the keyboard.

    • Ribbon cables still connect the two pieces.

    Aggiungi Commento

    • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

    • Pull up the ribbon cables from their sockets.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Keegan Lapham

Membro da: 22/02/2018

668 Reputazione

6 Guide realizzate

Team

USF Tampa, Team S1-G3, Cagle Spring 2018 Membro di USF Tampa, Team S1-G3, Cagle Spring 2018

USFT-CAGLE-S18S1G3

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 24

Tutti i Tempi: 108