Introduzione

This guide will teach you how to replace the Charging Ports on the HP Stream 13-c010nr.

Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.
  • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

Aggiungi Commento

Remove the thirteen 5mm Phillips #0 screws from the bottom case.
  • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

Aggiungi Commento

  • Flip the laptop over and open it up.

  • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

  • Lift up the keyboard.

  • Ribbon cables still connect the two pieces.

Aggiungi Commento

  • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

  • Pull up the ribbon cables from their sockets.

Aggiungi Commento

  • Disconnect the charging port from the motherboard.

Aggiungi Commento

  • Remove the two 5mm Phillips screws from the charging port.

  • Remove the bracket.

  • Pull out the charging port.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Keegan Lapham

Membro da: 22/02/2018

661 Reputazione

6 Guide realizzate

Team

USF Tampa, Team S1-G3, Cagle Spring 2018 Membro di USF Tampa, Team S1-G3, Cagle Spring 2018

USFT-CAGLE-S18S1G3

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 8

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 28

Tutti i Tempi: 69