Salta al contenuto principale

Introduzione

Sometimes the keyboard of an HP Stream 11-d010nr will start to behave sub optimally, such as unresponsive or sticky keys. This guide will show you how to replace it.

  1. Unplug and turn off the HP Stream 11 before disassembling the device. Pry off the two elliptical rubber inserts (one in each corner).
    • Unplug and turn off the HP Stream 11 before disassembling the device.

    • Pry off the two elliptical rubber inserts (one in each corner).

    • Pry off the two circular rubber inserts below the removed elliptical inserts (one in each corner).

  2. Remove the eleven 5.6 mm Phillips #1 screws.
    • Remove the eleven 5.6 mm Phillips #1 screws.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Using an iFixit opening tool, pry open the case to separate the keyboard from the main body. HP Stream 11s tend to be really difficult to open. If your device is not opening with a standard iFixit opening tool, use a nylon spudger, then the metal spudger, or a metal Jimmy as the last resort.
    • Using an iFixit opening tool, pry open the case to separate the keyboard from the main body.

    • HP Stream 11s tend to be really difficult to open. If your device is not opening with a standard iFixit opening tool, use a nylon spudger, then the metal spudger, or a metal Jimmy as the last resort.

    • When using the metal spudger or Jimmy, be careful not to bring these tools into contact with any electronic components of the device as this can damage the device.

  5. Slowly lift the keyboard as there are multiple ribbon cables that could easily be damaged if lifted with force.
    • Slowly lift the keyboard as there are multiple ribbon cables that could easily be damaged if lifted with force.

    • Carefully lift the keyboard and locate the three ribbon cables connecting the main body of the laptop to the keyboard.

  6. Using your fingernail,  lift the flaps on the ZIF connectors that are securing the three ribbon cables. Carefully disconnect the three ribbon cables. Carefully disconnect the three ribbon cables.
    • Using your fingernail, lift the flaps on the ZIF connectors that are securing the three ribbon cables.

    • Carefully disconnect the three ribbon cables.

  7. Lift the keyboard out of the laptop to remove it from the device.
    • Lift the keyboard out of the laptop to remove it from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Josh Corrigan

Membro da: 24/01/2019

326 Reputazione

2 Guide realizzate

Team

Cal Poly, Team S1-G3, White Winter 2019 Membro di Cal Poly, Team S1-G3, White Winter 2019

CPSU-WHITE-W19S1G3

4 Membri

5 Guide realizzate

I feel like the 5-10 minutes estimated time is way too short for this repair (however, I have not done this, and may be wrong).

Constantin Legras - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 91