Salta al contenuto principale

HP Slate 7 Extreme 4400US Battery Replacement

Cosa ti serve

  1. HP Slate 7 Extreme 4400US Battery Replacement, Back Cover: passo 1, immagine 1 di 3 HP Slate 7 Extreme 4400US Battery Replacement, Back Cover: passo 1, immagine 2 di 3 HP Slate 7 Extreme 4400US Battery Replacement, Back Cover: passo 1, immagine 3 di 3
    • Use the plastic opening tool to separate the back cover from the tablet. Carefully use the tool to pry open the sides, going around the entire tablet to lift the sides up.

    • Once all sides have been pried up, pull the cover off and place it to the side.

  2. HP Slate 7 Extreme 4400US Battery Replacement, Battery: passo 2, immagine 1 di 3 HP Slate 7 Extreme 4400US Battery Replacement, Battery: passo 2, immagine 2 di 3 HP Slate 7 Extreme 4400US Battery Replacement, Battery: passo 2, immagine 3 di 3
    • Cut the battery connectors one by one using wire cutters.

    • Do not cut all the wires at the same time; you risk blowing up the battery or destroying the motherboard!

    • After disconnecting the battery, take the new battery and use wire connectors to connect to the motherboard.

    • You may use a soldering tool to disconnect the wires from the motherboard, and to also soldering the wires for the replacement battery onto the motherboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Brandon Ko

Membro da: 09/15/16

698 Reputazione

6 Guide realizzate

Team

USF Tampa, Team 11-4, Blackwell Fall 2016 Membro di USF Tampa, Team 11-4, Blackwell Fall 2016

USFT-BLACKWELL-F16S11G4

4 Membri

16 Guide realizzate

Un commento

Dude, do you have this part? HP Slate 7 Extreme 4400CA

https://www.worthpoint.com/worthopedia/o...

sivaldodomingos - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 1,097