Salta al contenuto principale

Introduzione

The maximum dimensions of a new solid state drive are 100.5 x 69.85 x 7.0mm. Before performing any work, always remember to completely turn off and disconnect your computer from any power source.

Parti

Nessuna parte specificata.

  1. Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up. Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. Pull up on the hard drive bay handle and push it to the left while holding back the metal tab on the bottom.
    • Pull up on the hard drive bay handle and push it to the left while holding back the metal tab on the bottom.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Pull side latch out and slide the hard drive tray out of the bay.
    • Pull side latch out and slide the hard drive tray out of the bay.

  5. Remove the four 5/16" side screws, with the T15 Torx Screwdriver, and gently take out the drive. Remove the four 5/16" side screws, with the T15 Torx Screwdriver, and gently take out the drive.
    • Remove the four 5/16" side screws, with the T15 Torx Screwdriver, and gently take out the drive.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Documenti Allegati

Janelle Layman

Membro da: 01/10/2015

219 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 1-20, Maness Fall 2015 Membro di Cal Poly, Team 1-20, Maness Fall 2015

CPSU-MANESS-F15S1G20

4 Membri

12 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 60

Tutti i Tempi: 2,065