Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Make sure that your device is properly shut down and unplugged from any outlet.
-
Flip Pavilion over so that the bottom faces up and locate the battery in the bottom left corner.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press and slide up the battery release tab with your thumb until the battery pops out of place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using two fingers, pry the rest of the battery out of the socket.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a Phillips #0 screwdriver, unscrew all four Phillips PM 2.5X13.0mm screws and place in a secure area until the end of the project.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip laptop back over and open as far as it can go.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the flat edge of the plastic spudger inserted under the bottom of the strip cover and pry upwards to un-clip the cover, starting at the right and moving to the left.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use hands to completely lift off the strip cover and remove.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the Phillips #0 screwdriver again, unscrew all four Phillips PM 2.5X13.0mm screws from the top of the keyboard and set aside.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your hands, lift the keyboard up from the top towards yourself until the keyboard is resting in your hand.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Gently slide out the connecting cable from the laptop to the keyboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Completely remove the keyboard from the rest of the laptop.
-