Aggiusta la tua roba Comunità Store

HP Pavilion x360 m3-u103dx Fan Replacement

Introduzione

Make sure device is powered off and unplugged from any power source.

Cosa ti serve

  1. HP Pavilion x360 m3-u103dx Fan Replacement, Fan: passo 1, immagine 1 di 1

    • Power off device.

    • Flip laptop over.

    Traduci

  2. HP Pavilion x360 m3-u103dx Fan Replacement: passo 2, immagine 1 di 2 HP Pavilion x360 m3-u103dx Fan Replacement: passo 2, immagine 2 di 2

    • Remove the rubber foot with a Metal spudger

    • Remove 5 Phillip 2.4 x 5.7mm screws using a PH0 Phillips head screwdriver.

    • Remove 5 Phillips 2.8 x 5.0mm screws using a PH0 Phillips head screwdriver.

    Traduci

  4. HP Pavilion x360 m3-u103dx Fan Replacement: passo 3, immagine 1 di 3 HP Pavilion x360 m3-u103dx Fan Replacement: passo 3, immagine 2 di 3 HP Pavilion x360 m3-u103dx Fan Replacement: passo 3, immagine 3 di 3

    • Open computer and pry open keyboard panel using the Metal Spudger. Apply little pressure then increase until keyboard pops away from motherboard.

    • Gently lift keyboard on the mouse pad side. Remove three connected ribbon wires connecting keyboard to frame by gently disconnecting them from the motherboard.

    Traduci

  5. HP Pavilion x360 m3-u103dx Fan Replacement: passo 4, immagine 1 di 1

    • Remove eleven 2.0 x 4.6mm screws using the Phillips 00 Screwdriver

    Traduci

  6. HP Pavilion x360 m3-u103dx Fan Replacement: passo 5, immagine 1 di 3 HP Pavilion x360 m3-u103dx Fan Replacement: passo 5, immagine 2 di 3 HP Pavilion x360 m3-u103dx Fan Replacement: passo 5, immagine 3 di 3

    • Remove the motherboard gently from the base of the laptop.

    • Disconnect the fastened cables from the motherboard by carefully pushing the cable's plastic edges using the metal Spudger.

    Traduci

  7. HP Pavilion x360 m3-u103dx Fan Replacement: passo 6, immagine 1 di 2 HP Pavilion x360 m3-u103dx Fan Replacement: passo 6, immagine 2 di 2

    • Using the Phillips 00 Screw Driver. remove 4 screws from the heat sink.

    • Remove any adhesive tape. Detach the fan/heat sink.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,274