Salta al contenuto principale

HP Pavilion x360 m3-u001dx USB Port Shield Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement, Keyboard: passo 1, immagine 1 di 1
    • Shut down the computer.

    • Disconnect the power and all external devices connected to the computer.

    • Working on your device while it is turned on may result in electric shock.

  2. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 2, immagine 1 di 2 HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 2, immagine 2 di 2
    • Use a Metal Spudger and remove the rubber foot closet from the bottom of the laptop.

  3. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 3, immagine 1 di 1
    • Remove all of the screws located on the bottom of the laptop:

    • 5 Phillips 2.4 x 5.7 mm screws

    • 5 Phillips 2.0 x 5.0 mm screws

    • Make special note of each screw and screw lock size and location during removal and replacement.

  4. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 4, immagine 1 di 1
    • Turn the computer over onto its base, with the computer open and the keyboard facing upward.

  5. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 5, immagine 1 di 2 HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 5, immagine 2 di 2
    • The keyboard is attached internally by clips. Use a small amount of force when removing the keyboard.

    • Use the Plastic Opening Tool to separate the keyboard from the base of the laptop.

  6. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 6, immagine 1 di 1
    • Raise the keyboard slightly to access the touch pad and keyboard cables.

    • Raising the keyboard too far or with excessive force may cause damage to the keyboard, touch pad cables, or their connectors.

  7. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 7, immagine 1 di 1
    • Disconnect the ribbon cables attaching the touch pad and keyboard to the system board (motherboard).

    • Using the Heavy-Duty Spudger lift up the plastic locks connecting the ribbon cable to the motherboard.

    • Use the blue plastic tab on the ribbon cable to pull it out from the lock on the motherboard.

  8. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement: passo 8, immagine 1 di 1
    • Lift the keyboard away from the base of the laptop.

  9. HP Pavilion x360 m3-u001dx USB Port Shield  Replacement, USB Port Shield: passo 9, immagine 1 di 3 HP Pavilion x360 m3-u001dx USB Port Shield  Replacement, USB Port Shield: passo 9, immagine 2 di 3 HP Pavilion x360 m3-u001dx USB Port Shield  Replacement, USB Port Shield: passo 9, immagine 3 di 3
    • (You don't NEED to remove this shielding as you can remove the board with it still there.)

    • Remove the adhesive strip.

    • Lift the shield away from the base of the laptop.

Conclusione

Follow these instructions in reverse order to reassemble your device.

Subhleen

Membro da: 02/01/17

1.268 Reputazione

5 Guide realizzate

Team

UW Tacoma, Team 1-6, Rose Winter 2017 Membro di UW Tacoma, Team 1-6, Rose Winter 2017

UWT-ROSE-W17S1G6

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 62