Salta al contenuto principale

HP Pavilion x360 14m-cd0003dx Fan Replacement

Cosa ti serve

  1. HP Pavilion x360 14m-cd0003dx Fan Replacement, Heat Sink and Fan: passo 1, immagine 1 di 1
    • Turn off the computer.

    • Disconnect the power cord and any external devices connected to the computer.

    • Make sure the device is completely turned off or else you may risk injury through electric shock.

  2. HP Pavilion x360 14m-cd0003dx Fan Replacement: passo 2, immagine 1 di 2 HP Pavilion x360 14m-cd0003dx Fan Replacement: passo 2, immagine 2 di 2
    • Flip the device so that the back plate of the laptop is up.

    • Use a Phillips #0 screwdriver to remove the four 6 mm Phillips screws from the bottom cover.

    • You might have to use a spudger to remove any rubber bezels that cover the screws.

    • Pry off the back cover with the spudger tool.

  3. HP Pavilion x360 14m-cd0003dx Fan Replacement: passo 3, immagine 1 di 2 HP Pavilion x360 14m-cd0003dx Fan Replacement: passo 3, immagine 2 di 2
    • Use a Phillips #00 screwdriver to remove the seven 5 mm screws that secure the fan and heatsink.

  4. HP Pavilion x360 14m-cd0003dx Fan Replacement: passo 4, immagine 1 di 1
    • Peel back the retention tape that secures the heat sink assembly.

  5. HP Pavilion x360 14m-cd0003dx Fan Replacement: passo 5, immagine 1 di 1
    • Disconnect the fan cable from the connector on the system board.

  6. HP Pavilion x360 14m-cd0003dx Fan Replacement: passo 6, immagine 1 di 1
    • Remove the heat sink assembly from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 13

Tutti i Tempi: 436