Salta al contenuto principale

Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.

Cosa ti serve

  1. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 1, immagine 1 di 1
    • Make sure the laptop is turned off, and the power cable is removed.

    • Leaving the laptop turned on can cause damage to the hardware and any stored data.

  2. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 2, immagine 1 di 1
    • Turn the laptop over to access the backside of the computer.

    • Identify and confirm that the laptop is an HP Pavilion x360 11-p110nr.

    • Remove the nine screws from the back panel using a Phillips #0 screwdriver.

  3. Questo passaggio è privo di traduzione. Aiuta a tradurlo

    : passo 3, immagine 1 di 1
    • Remove the four screws holding in the hard drive compartment using a Phillips #0 screwdriver.

    • Pull the hard drive up and out to remove it from the compartment.

Linea Traguardo

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 14

Tutti i Tempi: 1,945