Aggiusta la tua roba Comunità Store

HP Pavilion x2 10-n113dx Hinge Replacement

Introduzione

The hinge of the HP Pavilion X2 may need replacement if it is damaged, or the screen is unable to open properly. This guide shows how to disassemble the HP Pavilion X2 to allow for removal and replacement of the hinge, which connects the screen with the keyboard.

Cosa ti serve

  1. HP Pavilion x2 10-n113dx Hinge Replacement, Hinge: passo 1, immagine 1 di 2 HP Pavilion x2 10-n113dx Hinge Replacement, Hinge: passo 1, immagine 2 di 2

    • Separate the screen from the keyboard.

    Modifica

  2. HP Pavilion x2 10-n113dx Hinge Replacement: passo 2, immagine 1 di 2 HP Pavilion x2 10-n113dx Hinge Replacement: passo 2, immagine 2 di 2

    • Remove the grey rubber bar using plastic spudger or tweezers, exposing the four screw heads.

    • The rubber bar is attached with an adhesive. A heat pad may be required to melt the adhesive and allow for easier removal.

    Modifica

  3. HP Pavilion x2 10-n113dx Hinge Replacement: passo 3, immagine 1 di 1

    • Unscrew the four screws using the Phillips #0 screwdriver.

    • All four of these screws have a diameter of 4.3 mm and a height of 3.7 mm.

    Modifica

  4. HP Pavilion x2 10-n113dx Hinge Replacement: passo 4, immagine 1 di 2 HP Pavilion x2 10-n113dx Hinge Replacement: passo 4, immagine 2 di 2

    • Remove the circular rubber tabs exposing the screw heads below.

    • A heat pad may be required to melt the tab adhesive and allow for easier removal.

    • Unscrew the two screws using the Phillips #0 screwdriver.

    • These two screws are 5.3 mm in diameter and 4.3 mm in height.

    Modifica

  6. HP Pavilion x2 10-n113dx Hinge Replacement: passo 5, immagine 1 di 3 HP Pavilion x2 10-n113dx Hinge Replacement: passo 5, immagine 2 di 3 HP Pavilion x2 10-n113dx Hinge Replacement: passo 5, immagine 3 di 3

    • Once all screws have been removed, gently pry open the back casing using a metal spudger.

    • Be sure to use the spudger at the marked locations to avoid damage to the casing.

    Modifica

  7. HP Pavilion x2 10-n113dx Hinge Replacement: passo 6, immagine 1 di 2 HP Pavilion x2 10-n113dx Hinge Replacement: passo 6, immagine 2 di 2

    • Completely remove the back casing.

    Modifica

  8. HP Pavilion x2 10-n113dx Hinge Replacement: passo 7, immagine 1 di 1

    • Unscrew the four screws located at the marked locations using the Phillips #0 screwdriver.

    • All fours of these screws have a 7.0 mm diameter an a 2.5 mm height.

    Modifica

  9. HP Pavilion x2 10-n113dx Hinge Replacement: passo 8, immagine 1 di 1

    • Remove adhesive that secures the ribbon cable using tweezers.

    Modifica

  10. HP Pavilion x2 10-n113dx Hinge Replacement: passo 9, immagine 1 di 3 HP Pavilion x2 10-n113dx Hinge Replacement: passo 9, immagine 2 di 3 HP Pavilion x2 10-n113dx Hinge Replacement: passo 9, immagine 3 di 3

    • Using a plastic spudger, flip open the switch for the connection port, allowing the ribbon cable to be removed.

    Modifica

  11. HP Pavilion x2 10-n113dx Hinge Replacement: passo 10, immagine 1 di 3 HP Pavilion x2 10-n113dx Hinge Replacement: passo 10, immagine 2 di 3 HP Pavilion x2 10-n113dx Hinge Replacement: passo 10, immagine 3 di 3

    • Gently lift the hinge from the attachment points as shown in the picture.

    • Tweezers can be also be used to ensure the ribbon cable does not get damaged in the process.

    • The hinge can now be completely separated.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Ajay Panuganti

Membro da: 04/01/19

181 Reputazione

1 Guida realizzata

Distintivi: 2

Team

IUPUI, Team S1-G4, Harley Spring 2019 Membro di IUPUI, Team S1-G4, Harley Spring 2019

IUPUI-HARLEY-S19S1G4

3 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 11

Tutti i Tempi: 1,114