Aggiusta la tua roba Comunità Store

HP Pavilion tx2500 Screen Rotator Replacement

Introduzione

This guide will provide instructions on how to disassemble the HP Pavilion tx2500 in order to replace the screen rotator.

Cosa ti serve

  1. HP Pavilion tx2500 Screen Rotator Replacement, Screen Rotator: passo 1, immagine 1 di 1

    • Completely turn off and unplug device. Lay the device bottom side up on a soft surface.

    Modifica

  2. HP Pavilion tx2500 Screen Rotator Replacement: passo 2, immagine 1 di 2 HP Pavilion tx2500 Screen Rotator Replacement: passo 2, immagine 2 di 2

    • Squeeze the latches on the battery until you hear a click. Slide out the battery.

    Modifica

  3. HP Pavilion tx2500 Screen Rotator Replacement: passo 3, immagine 1 di 1

    • Using the Phillips #0 screwdriver, remove the 4.5 mm screw from the WLAN model screen.

    • Once unscrewed, lift the right side of the WLAN module compartment cover and swing it to the left.

    Modifica

  4. HP Pavilion tx2500 Screen Rotator Replacement: passo 4, immagine 1 di 1

    • Using the plastic opening tool, disconnect the WLAN antenna cables from the WLAN module.

    Modifica

  6. HP Pavilion tx2500 Screen Rotator Replacement: passo 5, immagine 1 di 1

    • Using the Phillips #0 screwdriver, unscrew the 4.5 mm screw from the middle section in the battery compartment.

    Modifica

  7. HP Pavilion tx2500 Screen Rotator Replacement: passo 6, immagine 1 di 1

    • Use the plastic opening tool to disconnect the wires in the upper corners.

    Modifica

  8. HP Pavilion tx2500 Screen Rotator Replacement: passo 7, immagine 1 di 1

    • Flip the laptop front side up and then use your fingers to lift up the keyboard.

    Modifica

  9. HP Pavilion tx2500 Screen Rotator Replacement: passo 8, immagine 1 di 1

    • Lift up the black latch that connects the film strip to the base of the computer.

    • Use the plastic opening tool to disconnect the film strip from the base of the computer.

    Modifica

  10. HP Pavilion tx2500 Screen Rotator Replacement: passo 9, immagine 1 di 2 HP Pavilion tx2500 Screen Rotator Replacement: passo 9, immagine 2 di 2

    • Rotate the screen 90 degrees and remove the base under the screen.

    Modifica

  11. HP Pavilion tx2500 Screen Rotator Replacement: passo 10, immagine 1 di 1

    • Rotate the screen back towards you.

    • Lift up the convertible hinge to unclip it from the base of the computer.

    Modifica

  12. HP Pavilion tx2500 Screen Rotator Replacement: passo 11, immagine 1 di 2 HP Pavilion tx2500 Screen Rotator Replacement: passo 11, immagine 2 di 2

    • Using the Phillips #0 screwdriver, remove both of the 5.0 mm screws on the base of the rotator.

    Modifica

  13. HP Pavilion tx2500 Screen Rotator Replacement: passo 12, immagine 1 di 1

    • Gently lift up and remove the screen.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 620