Aggiusta la tua roba

Diritto alla Riparazione

Store

HP Pavilion p6 Hard Drive Replacement

Scritto Da: Oli (e 2 altri collaboratori)
  • Commenti: 0
  • Preferiti: 2
  • Completamenti: 4

Difficoltà

Facile

Passi

4

Tempo Necessario

Suggerisci un tempo??

Sezioni

1

Contrassegni

1

Member-Contributed Guide

Guida con Contributo Membro

Uno straordinario membro della nostra comunità ha realizzato questa guida. Non è gestita dallo staff iFixit.

Introduzione

How to upgrade or replace you Hard Drive in you HP Pavilion p6 computer.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Before you start make sure that all of the leads have been disconnected from the computer. It is strongly recomended to wait at least 15 minutes after turing it off to allow the computer and internal components to cool down. It is recomended to lay the computer down with the pull tab at the top to allow it to be easily opened.

    • Before you start make sure that all of the leads have been disconnected from the computer.

    • It is strongly recomended to wait at least 15 minutes after turing it off to allow the computer and internal components to cool down.

    • It is recomended to lay the computer down with the pull tab at the top to allow it to be easily opened.

    • It is also worth mentioning at this point that for complete safety when working inside the computer that wearing an anti-static band and touching a grounded metal object before starting is good practise.

    Modifica

  2. In order to remove the side panel a single screw needs to first be removed. The side panel can then be pulled towards the back of the computer using the pull tab provided. The panel then needs to be rotated as showed in order to remove it from the computer.

    • In order to remove the side panel a single screw needs to first be removed.

    • The side panel can then be pulled towards the back of the computer using the pull tab provided.

    • The panel then needs to be rotated as showed in order to remove it from the computer.

    Modifica

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

  4. Firstly the power and Sata cables should be disconected - they can be removed by just pulling them straight back. After this is done it should look like the second picture. Lastly four screws need to be removed that secure the Hard Drive to the case.

    • Firstly the power and Sata cables should be disconected - they can be removed by just pulling them straight back.

    • After this is done it should look like the second picture.

    • Lastly four screws need to be removed that secure the Hard Drive to the case.

    • Extreme care should be take here as the Hard Drive should be supported when loosening off the last screw. Be careful not to press on the casing and only hold it by the edges.

    Modifica

  5. The computer should now look like the first picture. While still supporting the Hard Drive by the edges slowly pull it towards you as shown and out of the computer. Make sure you keep it in a safe place and don't apply any force to the top cover.

    • The computer should now look like the first picture.

    • While still supporting the Hard Drive by the edges slowly pull it towards you as shown and out of the computer.

    • Make sure you keep it in a safe place and don't apply any force to the top cover.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Oli

Membro da: 03/01/2014

1.115 Reputazione

4 Guide realizzate

Distintivi: 15

+12 altri distintivi

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 33

Tutti i Tempi: 2,090