HP Pavilion g7-1150us Surface Panel Replacement

Introduzione

The surface panel will protect the inner processors and circuits of the computer from harm. If the panel happens to come loose or is damaged in any way, this guide will explain how to replace it using only a screwdriver and spudger.

Cosa ti serve

Passo 1 Battery

HP Pavilion g7-1150us Surface Panel Replacement, Battery: passo 1, immagine 1 di 2

HP Pavilion g7-1150us Surface Panel Replacement, Battery: passo 1, immagine 2 di 2

Slide the battery removal switch towards the center of the laptop until the battery pops out.

Modifica

Passo 2

Remove the battery from the computer.

Modifica

Passo 3 Surface Panel

HP Pavilion g7-1150us Surface Panel Replacement, Surface Panel: passo 3, immagine 1 di 1

Unscrew the two 4mm Phillips #0 screws found in the surface panel.

Modifica

Passo 4

Using the spudger, pry the surface panel off starting from the side where the battery was located.
Pry the remainder of the panel off by sliding the spudger underneath the panel and gently lifting.
Aim for the corners of the panel while using the spudger to methodically remove it without damaging it.