Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide pill shaped tab to the other side of the channel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove battery while keeping the tab to the side.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the two screws JIS #0 located on opposites sides of the panel.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove 3 screws located where the battery previously was.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove 6 screws located under the spot where the smaller L-shaped panel was located.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slowly pry off the keyboard from the back panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unplug wires connecting back panel to keyboard.
-