The large back panel contains a lot of screws that help keep it in tact. It covers and protects the majority of your device's insides. It can be somewhat tricky to remove.


Nessuna parte richiesta.

  1. Slide pill shaped tab to the other side of the channel.
    • Slide pill shaped tab to the other side of the channel.

    Aggiungi Commento

    • Remove battery while keeping the tab to the side.

    Aggiungi Commento

    • Unscrew the two screws JIS #0 located on opposites sides of the panel.

    • Screws are attached to the panel and will not fully come out.

    Aggiungi Commento

    • Carefully pry off the L-shaped panel.

    Aggiungi Commento

    • Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.

    Aggiungi Commento

    • Remove 3 screws located where the battery previously was.

    Aggiungi Commento

    • Remove 6 screws located under the spot where the smaller L-shaped panel was located.

    Aggiungi Commento

    • Slowly pry off the keyboard from the back panel.

    • Between the back panel and the keyboard there are two ribbon wires.

    • Remove slowly to not break the back panel. If it does not come off easily, check to see if all screws are removed.

    Aggiungi Commento

    • Unplug wires connecting back panel to keyboard.

    Aggiungi Commento


To reassemble your device, follow these instructions in reverse order.

Robert Hamilton

Membro da: 01/03/2018

1.051 Reputazione

10 Guide realizzate


Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 66